Génie bilingue - chimique, mécanique, minier
Innove, conceptualise et crée pour contribuer à un monde meilleur.
Conseiller aux études
Ramesh Subramanian
Téléphone : 705.675.1151 x 2274
Courriel : rsubramanian@laurentienne.ca

Exigences générales d’admission pour les candidats des écoles secondaires de l’Ontario
Les étudiants des écoles secondaires de l’Ontario qui présentent une demande d’admission pour une première année d’études à l’Université Laurentienne doivent détenir un diplôme d’études secondaires de l’Ontario (DESO), et au moins six cours de 12e année 4U/M. Ils doivent présenter leurs relevés de notes officiels, et avoir conservé une moyenne d’au moins 70% pour un minimum de six cours de niveau 4U/M.
Les cours réussis doivent inclure :
- Français 4U
- Fonctions avancées 4U
- Physique 4U
- Chimie 4U
- 1 autre cours de Mathématiques ou de Science au niveau 4U
- 1 autre cours de 4U/M
Titulaires de cours AP (Advanced Placement)
Les personnes qui ont terminé les cours donnant droit à des équivalences (cours AP) dans les sujets appropriés et qui ont obtenu une note de 4 ou plus reçoivent des crédits pour un maximum de 12 crédits. Elles doivent aussi satisfaire aux exigences normales d’admission à l’Université, car les cours donnant droit à des équivalences ne peuvent pas les remplacer.
Titulaires du baccalauréat international
Le baccalauréat international est accepté pour l’admission à l’Université, à condition que le candidat possède une note d’au moins 28 au grade, et qu’il ait pris six sujets (au moins trois en option forte). Des équivalences peuvent être accordées pour des cours en option forte si la note obtenue est de 5 ou plus.
Ils doivent présenter leurs relevés de notes officiels du baccalauréat international au Bureau des admissions pour évaluation.
Candidats d’autres écoles secondaires au Canada
Les étudiants qui présentent une demande d’admission pour une première année d’études à l’Université Laurentienne doivent détenir un diplôme d’études secondaires et satisfaire aux mêmes exigences que les étudiants de l’Ontario. Les étudiants du Québec doivent avoir réussi la première année d’un programme général du CEGEP ou 12e année avec une moyenne d’au moins 75%. Les étudiants qui ont terminé un programme de deux ou trois ans au CEGEP (diplôme d’études collégiales) seront considérés comme admis avec une possibilité d’équivalences.
Demandes des États-Unis
Les étudiantes et étudiants qui ont terminé la 12e année dans une école secondaire agréée des États-Unis peuvent être admis en première année. Le programme de 12e année doit inclure au moins quatre sujets, y compris l’anglais, et le postulant doit avoir obtenu une moyenne générale d’au moins B (70%).
Transfert d’un collège des arts appliqués et de technologie de l’Ontario
Les personnes qui ont terminé au moins une année d’études au collège et qui ont une moyenne générale d’au moins C peuvent être admises. Les personnes qui ont terminé des programmes d’études de deux ou de trois ans peuvent, en vertu de nombreuses ententes d’articulation conclues par l’Université Laurentienne, bénéficier de meilleures options de mobilité.
Personnes ayant fait d’autres études
Les étudiants qui ont fait des études et ont réussi des cours dans des collèges ou universités accrédités peuvent être admissibles à l’Université et pourraient recevoir des équivalences. Ces personnes doivent joindre leurs relevés de notes officiels à leur demande. Les demandes sont étudiées individuellement.
Demandes des autres pays
Les candidats doivent joindre à leur demande d’admission les relevés de notes officiels ainsi que les pièces justificatives pertinentes dans leur langue d’origine. Ces documents doivent avoir été traduits en français ou en anglais.
Les postulants aux programmes en anglais qui n’ont pas complété trois années d’études dans cette langue doivent fournir à l’université les résultats obtenus à un test de compétence en anglais (TOEFL, IELTS, CAEL ou MELAB) avec la note minimale requise. Les étudiants qui ne reçoivent pas le minimum, et qui sont autrement admissibles, peuvent s’inscrire au programme d’anglais langue seconde offert à l’Université Laurentienne. Pour d’autres détails, se référer au site Web de « Candidats d’écoles secondaires à l’étranger. »
Note pour les étudiants actuels
Les options de grade ci-dessous seront offertes lors de la prochaine année universitaire et ne le sont pas cette année. Si vous cherchez les cours à suivre afin de compléter les options d'un programme d'une année universitaire antérieure, svp consultez avec un conseiller académique.
Bachelor of Engineering - Génie chimique
Langue d’études
Les étudiants peuvent choisir d’étudier le génie chimique à l’Université Laurentienne soit en anglais ou en format bilingue (anglais et français). Les étudiants qui choisissent le format bilingue doivent compléter un minimum de 63 crédits de cours en français parmi les 144 crédits qui constituent le programme. Au total, 23 cours obligatoires sont disponibles en français dans ce programme (69 crédits). Dans l’objectif de satisfaire aux exigences du programme, les étudiants inscrits à la version bilingue du programme sont fortement encouragés de prendre tous ces cours en français.
Première année
Session d’automne
CHMI 1006F Chimie générale I ou CHMI 1006E General Chemistry I
ENGR 1007F Graphique et dessins techniques ou ENGR 1007E Engineering Graphics and Design
ENGR 1056F Mécanique appliquée I ou ENGR 1056E Applied Mechanics I
MATH 1036F Calcul I ou MATH 1036E Calculus I
PHYS 1006F Introduction à la physique I ou PHYS 1006E Introductory Physics I
Un cours complémentaire au choix ou un cours technique au choix (3 cr)
Session d’hiver
CHMI 1007F Chimie générale II ou CHMI 1007E General Chemistry II
COSC 2836F Logiciels pour les sciences ou COSC 2836E Computer Software for the Sciences
ENGR 1016F Communication en génie ou ENGR 1016E Engineering Communications
MATH 1037F Calcul II ou MATH 1037E Calculus II
MATH 1057F Algèbre linéaire I ou MATH 1057E Linear Algebra I
PHYS 1007F Introduction à la physique II ou PHYS 1007E Introductory Physics II
Deuxième année *
Session d’automne
CHMI 2426F Chimie organique I ou CHMI 2426E Organic Chemistry I
CHMI 2526F Introduction à la chimie physique I ou CHMI 2526E Intro to Physical Chemistry I
ENGR 2026F Matériaux d’ingénierie ou ENGR 2026E Engineering Materials
ENGR 2076F Mécanique et résistance des matériaux I ou ENGR 2076E Mechanics and Strength of Materials I
MATH 2066F Introduction aux équations différentielles ou MATH 2066E Introduction to Differential Equations
Un cours complémentaire au choix ou un cours technique au choix (3 cr)**
Session d’hiver
CHMI 2527F Introduction à la chimie physique II ou CHMI 2527E Introductory Physical Chemistry II
ENGR 2097F Mécanique des fluides I ou ENGR 2097E Fluid Mechanics I
ENGR 2276E Chemical Process Calculations
ENGR 3426F Économie appliquée à l’industrie ou ENGR 3426E Engineering Economics
MATH 3416F Méthodes numériques ou MATH 3416E Numerical Methods I
STAT 2246F Statistiques pour science et génie ou STAT 2246E Statistics for Scientists
* Veuillez vérifier avec le département pour les règlements régissant la participation à l'option COOP.
** Nous recommandons aux étudiants de s’inscrire au cours technique au choix ENGR 2106E Introduction to Mineral Resources Engineering dans leur 2e année puisque celui-ci est prérequis pour plusieurs des cours compris dans la Liste A.
Troisième année
Session d’automne
ENGR 3436 E Chemical Reaction Engineering and Reactor Design I
ENGR 3446E Heat Transfer
Cours complémentaires au choix et/ou cours techniques au choix (12 crédits)
Session d’hiver
ENGR 3126E Occupational Health Engineering
ENGR 3267E Process Dynamics and Control
ENGR 3416E Mass Transfer
ENGR 3476E Introduction to Polymers
OPER 4016E Project Management
Cours complémentaires au choix et/ou cours techniques au choix (3 crédits)
Quatrième année
Session d’automne
ENGR 4126F Séminaire en génie ou ENGR 4126E Engineering Seminar
ENGR 4435E Engineering Design Project
ENGR 4436E Chemical Process and Plant Design
ENGR 4447E Chemical Reaction Engineering and Reactor Design II
ENGR 4457E Separation Processes and Unit Operations
ENGR 4477E Process Modeling and Control
Session d’hiver
ENGR 4117F L’ingénierie, la technologie et la société ou
ENGR 4117E Engineering, Technology and Society
ENGR 4435E Chemical Engineering Senior Design Project
Cours complémentaires au choix et/ou cours techniques au choix (12 crédits)
COURS TECHNIQUES AU CHOIX ET COURS COMPLÉMENTAIRES AU CHOIX
Les étudiants doivent réussir 27 crédits techniques au choix, dont au moins 18 crédits dans la liste A ci-dessous. En outre, ils doivent réussir 6 crédits complémentaires au choix.
LISTE A – Cours techniques au choix (au moins 18 crédits)
ENGR 3116E Mineral Processing I ***
ENGR 3246E Corrosion and Protection of Metals ***
ENGR 3307E Materials Handling
ENGR 3437E Water and Wastewater Treatment
ENGR 3466E Environmental Impact of Process Industries
ENGR 3526E Fluid Mechanics II
ENGR 3536E Materials and Manufacturing
ENGR 4116E Industrial Engineering
ENGR 4426E Air Pollution Control
ENGR 3147E Mineral Processing II ***
ENGR 3226E Hydrometallurgy ***
ENGR 3257E Pyrometallurgy ***
ENGR 3477E Adsorption and Membrane Processes in Pollution Control
ENGR 3566E Biomechanics of Living Tissues
ENGR 4187E Solids Waste Processing and Recycling in the Minerals Industry
LISTE B Cours techniques au choix
(maximum de 9 crédits)
BIOL 1506F Biologie I ou BIOL 1506E Biology I
BIOL 1507F Biologie II ou BIOL 1507E Biology II
CHMI 2041E Introductory Environmental Chemistry (requis pour l’option durabilité environnementale)
CHMI 2117F Introduction à l’analyse quantitative ou CHMI 2117E Introductory Quantitative Analysis
CHMI 2316F Chimie inorganique I ou CHMI 2316E Inorganic Chemistry I
CHMI 2427F Chimie organique II ou CHMI 2427E Organic Chemistry II
COSC 1046E Computer Science I
COSC 1047E Computer Science II
ENGR 2106E Introduction to Mineral Resources Engineering ***
GEOL 1006F Introduction à la géologie I ou GEOL 1006E Introductory Geology I
GEOL 1007E Introductory Geology II
GEOL 2126E Mineralogy I
MATH 2037F Calcul avancé ou MATH 2037E Advanced Calculus
PHYS 2006E Introduction to Electricity and Electronics
D’autres cours pertinents dans les domaines des sciences et de l’ingénierie pourront être choisis moyennant l’approbation du Directeur de l’École
*** Les étudiants qui complètent ces cours à l’intérieur de leur programme de génie chimique peuvent faire demande pour la mention « Métallurgie extractive et traitement minéral. »
Cours complémentaires au choix
ACCT 1001F Utilisation des données financières ou ACCT 1001E Using Financial Information
ANCS 1006E Greek Civilization
ANCS 1007E Roman Civilization
ANCS 2016E Classical Mythology
ANTR 1007E Introduction to Sociocultural Anthropology
ARCL 1006E Introduction to Archeology and Physical Anthropology
ECON 1006F Introduction à la microéconomie ou ECON 1006E Introduction to Microeconomics
ECON 1007F Introduction à la macroéconomie ou ECON 1007E Introduction to Macroeconomics
ENGL 1705E Introduction to Writing and English Studies
ENGL 2005E Literatures in English
ENGL 2606E Backgrounds to Western Literature I
ENGL 2616E The Bible and Literature
ENGL 2626E Critical Approaches
ENGL 2676E Popular Literature and Culture I
ENVI 2506E Cultural Representations of the Environment
ENVI 2507F Empreinte écologique et développement durable
ENVI 2516E Ecological Footprints and Demographic Change
GEOG 1026F Introduction à la géographie physique ou
GEOG 1026E Introduction to Physical Geography
GEOG 1027F Introduction à la géographie humaine ou GEOG 1027E Introduction to Human Geography
HIST 1106F Introduction à l’histoire du XXe siècle ou HIST 1106E Introduction to the 20th Century
HIST 1107F Perspectives historiques sur les problèmes contemporains ou HIST 1107E Contemporary Issues in Historical Perspective
HIST 1206F civilisation occidentale: depuis la Renaissance jusqu’à la Révolution française ou HIST 1206E Western Civilization: Renaissance to the French Revolution
HIST 1207F La civilisation occidentale: de la Révolution française à nos jours ou HIST 1207E Western Civilization: French Revolution to the Present
HIST 1406F Histoire canadienne: L’époque de la préconfédération ou HIST 1406E Canadian History: Pre-Confederation
HIST 1407F Histoire canadienne : depuis la confédération ou HIST 1407E Canadian History: Post-Confederation
JURI 1105E Introduction to Legal Studies
JURI 1106F Introduction à l’étude du droit ou JURI 1006E Introduction to Legal Studies I
JURI 1107F Introduction au droit criminel ou JURI 1007E Introduction to Legal Studies II
LBST 1006E Introduction to Labour Studies I
LBST 1007E Introduction to Labour Studies II
LBST 2026E The World of Work (équivalent au cours SOCI-2026E)
LBST 2106E Occupational Health and Safety, Level I
LBST 2246E What Do Unions Do? (équivalent au cours SOCI-2246E)
LBST 3106E Occupational Health and Safety, Level II
MGMT 1306F Gestion des organisations I ou MGMT 1006E Management of Organizations I
MGMT 1307F Gestion des organisations II ou MGMT 1007E Management of Organizations II
OPER 2006F Introduction à la science de la gestion ou OPER 2006E Introduction to Management Science
OPER 4016E Project Management (seulement éligible à titre de cours au choix pour les étudiants en génie mécanique)
PHIL 1105F Introduction à la philosophie ou PHIL 1115E Introduction to Philosophy
PHIL 2586F Philosophie de la sexualité ou PHIL 2126E Philosophy of Sexuality
PHIL 2156E Philosophy, Culture and Power
PHIL 2216F Technologie, valeurs et environnement ou PHIL 2747E Technology, Freedom and Values
PHIL 2217F Éthique de l’environnement ou PHIL 2217E Environmental Ethics
PHIL 2256F Philosophie de l’éducation ou PHIL 2256E Philosophy of Education
PHIL 2505F Pensée critique et argumentation ou PHIL 2505E Critical Thinking and Argument
PHIL 2525F Problèmes éthiques contemporains ou PHIL 2525E Contemporary Moral Issues
PHIL 2876E Business Ethics
POLI 1005E Introduction to Political Science
POLI 1006F Politique et sociétés ou POLI 1006E Political Regimes
POLI 1007F Problèmes politiques contemporains ou POLI 1007E Political Ideas and Political Actors
POLI 2306F Relations internationales ou POLI 2306E International Relations
POLI 2426E Individual, Community and the Political Order
POLI 2526E Approaches to Justice
POLI 2575E Philosophy of Law
PSYC 1105F Initiation à la psychologie ou PSYC 1105E Introduction to Psychology
SOCI 1015F Étude de la société ou SOCI 1015E Understanding Society
WOMN 1005F Introduction aux études des femmes ou WOMN 1005E Introduction to Women’s Studies
D’autres cours pertinents peuvent être choisis moyennant l’approbation du Directeur de l’École.
Bachelor of Engineering - Génie mécanique - option générale
Langue d’études
Les étudiants peuvent choisir d’étudier le génie mécanique à l’Université Laurentienne soit en anglais ou en format bilingue (anglais et français). Les étudiants qui choisissent le format bilingue doivent compléter un minimum de 63 crédits de cours en français parmi les 144 crédits qui constituent le programme. Au total, 18 cours obligatoires sont disponibles en français dans ce programme (54 crédits). Dans l’objectif de satisfaire aux exigences du programme, les étudiants inscrits à la version bilingue du programme sont fortement encouragés de prendre tous ces cours en français.
Première année
Session d’automne:
CHMI 1006F Chimie générale I ou CHMI 1006E General Chemistry I
ENGR 1007F Graphique et dessins techniques ou ENGR 1007E Engineering Graphics and Design
ENGR 1056F Mécanique appliquée I ou ENGR 1056E Applied Mechanics I
MATH 1036F Calcul I ou MATH 1036E Calculus I
PHYS 1006F Introduction à la physique I ou PHYS 1006E Introductory Physics I
Cours complémentaire au choix (3 crédits)
Session d’hiver:
ENGR 1016F Communication en génie ou ENGR 1016E Engineering Communications
ENGR 1017E Computer Aided Design
ENGR 1057E Applied Mechanics II
MATH 1037F Calcul II ou MATH 1037E Calculus II
MATH 1057F Algèbre linéaire I ou MATH 1057E Linear Algebra I
PHYS 1007F Introduction à la physique II ou PHYS 1007E Introductory Physics II
Deuxième année
Session d’automne:
COSC 1046E Computer Science I
ENGR 2026F Matériaux d’ingénierie ou ENGR 2026E Engineering Materials
ENGR 2036E Engineering Thermodynamics I
ENGR 2076F Mécanique et résistance des matériaux I ou ENGR 2076E Mechanics and Strength of Materials I
MATH 2066F Introduction aux équations différentielles ou MATH 2066E Introduction to Differential
Equations
Cours complémentaire au choix (3 crédits)
Session d’hiver:
COSC 1047E Computer Science II
ENGR 2097F Mécanique des fluides I ou ENGR 2097E Fluid Mechanics I
ENGR 2506E Dynamics
ENGR 2537E Engineering Thermodynamics II
ENGR 2587E Mechanics and Strength of Materials II
STAT 2246F Statistiques pour science et génie ou STAT 2246E Statistics for Scientists
Troisième année
Session d’automne:
ENGR 3426F Économie appliquée à l’industrie ou ENGR 3426E Engineering Economics
ENGR 3526E Fluid Mechanics II
ENGR 3536E Materials and Manufacturing
ENGR 3546E System Modeling and Simulation
ENGR 3556E Electromechanical Actuators and Power Electronics
Cours technique au choix (3 crédits des listes A ou B – se référer aux exigences en guise de cours techniques au choix)
Session d’hiver :
ENGR 3327E Mine Ventilation
ENGR 3507E Finite Element Methods
ENGR 3516E Vibrations and Dynamic Systems
ENGR 3517E Machine Design
ENGR 3547E Control Systems
MATH 3416F Méthodes numériques ou MATH 3416E Numerical Methods I
Quatrième année
Session d’automne:
ENGR 3446E Heat Transfer
ENGR 4126 F Séminaire en génie ou ENGR 4126E Engineering Seminar
ENGR 4526E Sensors and Instrumentation
ENGR 4566E Fluid Power Systems
ENGR 4595E Mechanical Engineering Design Project
Cours technique au choix (3 crédits des listes A ou B – se référer aux exigences en guise de cours techniques au choix)
Session d’hiver :
ENGR 3566E Biomechanics
ENGR 4117F L’ingénierie, la technologie et la société ou
ENGR 4117E Engineering, Technology and Society
ENGR 4547E Robot Manipulation
ENGR 4595E Mechanical Engineering Design Project
Cours technique au choix (3 crédits des listes A ou B – se référer aux exigences en guise de cours techniques au choix)
Cours complémentaire au choix (3 crédits)
Bachelor of Engineering – Génie mécanique, option mécatronique
Première année
Session d’automne:
CHMI 1006F Chimie générale I ou CHMI 1006E General Chemistry I
ENGR 1007F Graphique et dessins techniques ou ENGR 1007E Engineering Graphics and Design
ENGR 1056F Mécanique appliquée I ou ENGR 1056E Applied Mechanics I
MATH 1036F Calcul I ou MATH 1036E Calculus I
PHYS 1006F Introduction à la physique I ou PHYS 1006E Introductory Physics I
Cours complémentaire au choix (3 crédits)
Session d’hiver:
ENGR 1016F Communication en génie ou ENGR 1016E Engineering Communications
ENGR 1017E Computer Aided Design
ENGR 1057E Applied Mechanics II
MATH 1037F Calcul II ou MATH 1037E Calculus II
MATH 1057F Algèbre linéaire I ou MATH 1057E Linear Algebra I
PHYS 1007F Introduction à la physique II ou PHYS 1007E Introductory Physics II
Deuxième année
Session d’automne:
COSC 1046E Computer Science I
ENGR 2026F Matériaux d’ingénierie ou ENGR 2026E Engineering Materials
ENGR 2036E Engineering Thermodynamics I
ENGR 2076F Mécanique et résistance des matériaux I ou ENGR 2076E Mechanics and Strength of Materials I
MATH 2066F Introduction aux équations différentielles ou MATH 2066E Introduction to Differential Equations
Cours complémentaire au choix (3 crédits)
Session d’hiver:
COSC 1047E Computer Science II
ENGR 2097F Mécanique des fluides I ou ENGR 2097E Fluid Mechanics I
ENGR 2506E Dynamics
ENGR 2537E Engineering Thermodynamics II
ENGR 2587E Mechanics and Strength of Materials II
STAT 2246F Statistiques pour science et génie ou STAT 2246E Statistics for Scientists
Troisième année
Session d’automne :
COSC 2006E Data Structures
ENGR 3426F Économie appliquée à l’industrie ou ENGR 3426E Engineering Economics
ENGR 3526E Fluid Mechanics II
ENGR 3536E Materials and Manufacturing
ENGR 3546E System Modeling and Simulation
ENGR 3556E Electromechanical Actuators and Power Electronics
Session d’hiver :
ENGR 3507E Finite Element Methods
ENGR 3516E Vibrations and Dynamic Systems
ENGR 3517E Machine Design
ENGR 3547E Control Systems
ENGR 3577E Microprocessor Systems and Interfacing
MATH 3416F Méthodes numériques ou MATH 3416E Numerical Methods I
Quatrième année
Session d’automne :
ENGR 3446E Heat Transfer
ENGR 4126 F Séminaire en génie ou ENGR 4126E Engineering Seminar
ENGR 4526E Sensors and Instrumentation
ENGR 4546E Digital Control
ENGR 4576E Digital Logic and Microprocessors
ENGR 4595E Mechanical Engineering Design Project
Session d’hiver :
COSC 3807E Applied Networks
ENGR 4117F L’ingénierie, la technologie et la société ou
ENGR 4117E Engineering, Technology and Society
ENGR 4547E Robot Manipulation
ENGR 4595E Mechanical Engineering Design Project
Cours technique au choix (3 crédits de la liste B)
Cours complémentaire au choix (3 crédits)
Exigences en guise de cours techniques au choix :
Option générale: 6 crédits de la liste A et 3 crédits de la liste B
Option mécatronique : 3 crédits de la liste B
Cours techniques au choix en génie mécanique - Liste A
COSC 2307E Database Programming
COSC 2406E Assembly Language Programming
ENGR 3126E Occupational Health Engineering
ENGR 3157E Operations Research
ENGR 3307E Materials Handling
ENGR 3437E Water and Wastewater Treatment
ENGR 3466E Environmental Impact of Process Industries
ENGR 3477E Adsorption and Membrane Processes in Pollution Control
ENGR 4157E Power Machines
ENGR 4187E Solid Waste Processing and Recycling in the Minerals Industry
ENGR 4366E Automation and Reliability of Mining Equipment
MATH 2037F Calcul avancé ou MATH 2037E Advanced Calculus
MATH 2057F Algèbre linéaire II ou MATH 2057E Linear Algebra II
PHYS 2006E Introduction to Electricity and Electronics
PHYS 3046E Mechanical Properties of Solids and Fluids
Cours techniques au choix en génie mécanique - Liste B
BIOL 1000E Canadian Environmental Biology
BIOL 1506F Biologie I ou BIOL 1506E Biology I
BIOL 2356F Principes d’écologie ou BIOL 2356E Principles of Ecology
CHMI 1007F Chimie générale II ou CHMI 1007E General Chemistry II
ENVI-1406F Environnement I ou ENSC 1406E Earth’s Environmental Systems
ENVI 1507F Environnement II
GEOL 1006F Introduction à la géologie I ou GEOL 1006E Introductory Geology I
PHYS 2606E Biophysics of Fluids
PHYS 2616E Physics of Hearing and Vision
Cours complémentaires au choix
ACCT 1001F Utilisation des données financières ou ACCT 1001E Using Financial Information
ANCS 1006E Greek Civilization
ANCS 1007E Roman Civilization
ANCS 2016E Classical Mythology
ANTR 1007E Introduction to Sociocultural Anthropology
ARCL 1006E Introduction to Archeology and Physical Anthropology
ECON 1006F Introduction à la microéconomie ou ECON 1006E Introduction to Microeconomics
ECON 1007F Introduction à la macroéconomie ou ECON 1007E Introduction to Macroeconomics
ENGL 1705E Introduction to Writing and English Studies
ENGL 2005E Literatures in English
ENGL 2606E Backgrounds to Western Literature I
ENGL 2616E The Bible and Literature
ENGL 2626E Critical Approaches
ENGL 2676E Popular Literature and Culture I
ENVI 2506E Cultural Representations of the Environment
ENVI 2507F Empreinte écologique et développement durable
ENVI 2516E Ecological Footprints and Demographic Change
GEOG 1026F Introduction à la géographie physique ou
GEOG 1026E Introduction to Physical Geography
GEOG 1027F Introduction à la géographie humaine ou GEOG 1027E Introduction to Human Geography
HIST 1106F Introduction à l’histoire du XXe siècle ou HIST 1106E Introduction to the 20th Century
HIST 1107F Perspectives historiques sur les problèmes contemporains ou HIST 1107E Contemporary Issues in Historical Perspective
HIST 1206F civilisation occidentale: depuis la Renaissance jusqu’à la Révolution française ou HIST 1206E Western Civilization: Renaissance to the French Revolution
HIST 1207F La civilisation occidentale: de la Révolution française à nos jours ou HIST 1207E Western Civilization: French Revolution to the Present
HIST 1406F Histoire canadienne: L’époque de la préconfédération ou HIST 1406E Canadian History: Pre-Confederation
HIST 1407F Histoire canadienne : depuis la confédération ou HIST 1407E Canadian History: Post-Confederation
JURI 1105E Introduction to Legal Studies
JURI 1106F Introduction à l’étude du droit ou JURI 1006E Introduction to Legal Studies I
JURI 1107F Introduction au droit criminel ou JURI 1007E Introduction to Legal Studies II
LBST 1006E Introduction to Labour Studies I
LBST 1007E Introduction to Labour Studies II
LBST 2026E The World of Work (équivalent au cours SOCI-2026E)
LBST 2106E Occupational Health and Safety, Level I
LBST 2246E What Do Unions Do? (équivalent au cours SOCI-2246E)
LBST 3106E Occupational Health and Safety, Level II
MGMT 1306F Gestion des organisations I ou MGMT 1006E Management of Organizations I
MGMT 1307F Gestion des organisations II ou MGMT 1007E Management of Organizations II
OPER 2006F Introduction à la science de la gestion ou OPER 2006E Introduction to Management Science
OPER 4016E Project Management (seulement éligible à titre de cours au choix pour les étudiants en génie mécanique)
PHIL 1105F Introduction à la philosophie ou PHIL 1115E Introduction to Philosophy
PHIL 2586F Philosophie de la sexualité ou PHIL 2126E Philosophy of Sexuality
PHIL 2156E Philosophy, Culture and Power
PHIL 2216F Technologie, valeurs et environnement ou PHIL 2747E Technology, Freedom and Values
PHIL 2217F Éthique de l’environnement ou PHIL 2217E Environmental Ethics
PHIL 2256F Philosophie de l’éducation ou PHIL 2256E Philosophy of Education
PHIL 2505F Pensée critique et argumentation ou PHIL 2505E Critical Thinking and Argument
PHIL 2525F Problèmes éthiques contemporains ou PHIL 2525E Contemporary Moral Issues
PHIL 2876E Business Ethics
POLI 1005E Introduction to Political Science
POLI 1006F Politique et sociétés ou POLI 1006E Political Regimes
POLI 1007F Problèmes politiques contemporains ou POLI 1007E Political Ideas and Political Actors
POLI 2306F Relations internationales ou POLI 2306E International Relations
POLI 2426E Individual, Community and the Political Order
POLI 2526E Approaches to Justice
POLI 2575E Philosophy of Law
PSYC 1105F Initiation à la psychologie ou PSYC 1105E Introduction to Psychology
SOCI 1015F Étude de la société ou SOCI 1015E Understanding Society
WOMN 1005F Introduction aux études des femmes ou WOMN 1005E Introduction to Women’s Studies
D’autres cours pertinents peuvent être choisis moyennant l’approbation du Directeur de l’École.
Bachelor of Engineering - Génie minier
Langue d’études
Les étudiants peuvent choisir d’étudier le génie minier à l’Université Laurentienne soit en anglais ou en format bilingue (anglais et français). Les étudiants qui choisissent le format bilingue doivent compléter un minimum de 63 crédits de cours en français parmi les 144 crédits qui constituent le programme. Au total, 20 cours obligatoires sont disponibles en français dans ce programme (60 crédits). Dans l’objectif de satisfaire aux exigences du programme, les étudiants inscrits à la version bilingue du programme sont fortement encouragés de prendre tous ces cours en français.
Première année
Session d’automne
CHMI 1006F Chimie générale I ou CHMI 1006E General Chemistry I
ENGR 1007F Graphique et dessins techniques ou ENGR 1007E Engineering Graphics and Design
ENGR 1056F Mécanique appliquée I ou ENGR 1056E Applied Mechanics I
GEOL 1006E Introductory Geology I ou GEOL 1006F Introduction à la géologie I
MATH 1036F Calcul I ou MATH 1036E Calculus I
PHYS 1006F Introduction à la physique I ou PHYS 1006E Introductory Physics I
Session d’hiver
ENGR 1016F Communication en génie ou ENGR 1016E Engineering Communications
ENGR 1057E Applied Mechanics II
COSC 2836F Logiciels pour les sciences ou COSC 2836E Computer Software for the Sciences
MATH 1037F Calcul II ou MATH 1037E Calculus II
MATH 1057F Algèbre linéaire I ou MATH 1057E Linear Algebra I
PHYS 1007F Introduction à la physique II ou PHYS 1007E Introductory Physics II
Deuxième année*
Session d’automne
ENGR 2026F Matériaux d’ingénierie ou ENGR 2026E Engineering Materials
ENGR 2036E Engineering Thermodynamics I
ENGR 2076F Mécanique et résistance des matériaux I ou ENGR 2076E Mechanics and Strength of Materials I
ENGR 2106 E Introduction to Mineral Resources Engineering
MATH 2066F Introduction aux équations différentielles ou MATH 2066E Introduction to Differential Equations
- Un cours complémentaire au choix ou un cours technique au choix (3 cr) *
Session d’hiver
ENGR 2097F Mécanique des fluides I ou ENGR 2097E Fluid Mechanics I
ENGR 2346E Rock Mechanics
ENGR 2356E Underground Mining Methods
ENGR 2517E Surveying
ENGR 3317E Surface Mining
STAT 2246F Statistiques pour science et génie ou STAT 2246E Statistics for Scientists
* Veuillez vérifier avec l’École de génie Bharti pour les règlements régissant la participation à l'option COOP.
Troisième année
Session d’automne
ENGR 3116E Mineral Separation Processes I
ENGR 3307E Materials Handling
ENGR 3346E Ore Reserve Analysis and Geostatistics
ENGR 3376E Drilling and Development
ENGR 3387E Ground Control
- Un cours complémentaire au choix ou un cours technique au choix (3 crédits)
Session d’hiver
ENGR 3126E Occupational Health Engineering
ENGR 3327E Mine Ventilation
ENGR 3337E Explosives and Blasting Technology
ENGR 3426F Économie appliquée à l’industrie ou ENGR 3426E Engineering Economics
GEOL 2017E Geology for Engineers
MATH 3416F Méthodes numériques ou MATH 3416E Numerical Methods I
Quatrième année
Session d’automne
ENGR 3157E Operations Research
ENGR 4126F Séminaire en génie ou ENGR 4126E Engineering Seminar
ENGR 4306E Open Pit Design
ENGR 4316E Mine Design I
Cours complémentaire au choix ou cours techniques au choix (6 crédits)
Session d’hiver
ENGR 4117F L’ingénierie, la technologie et la société ou ENGR 4117E Engineering, Technology and Society
ENGR 4327E Mine Design II
ENGR 4366E Automation and Reliability of Mining Equipment
OPER 4016E Project Management
Cours complémentaire au choix ou cours techniques au choix (6 crédits)
COURS TECHNIQUES AU CHOIX ET COURS COMPLÉMENTAIRES AU CHOIX
Les étudiants doivent réussir 9 crédits de cours complémentaires au choix et 9 crédits de cours techniques au choix, dont au moins 6 crédits dans la liste A ci-dessous.
Liste A
BIOL 2356F Principes d’écologie ou BIOL 2356E Principles of Ecology
CHMI 2041E Introductory Environmental Chemistry
ENGR 1017E Computer Aided Design
ENGR 2506E Dynamics
ENGR 2537E Engineering Thermodynamics II
ENGR 2587E Mechanics and Strength of Materials II
ENGR 3147E Mineral Processing II
ENGR 3267E Process Dynamics and Control
ENGR 3437E Water and Waste water Treatment
ENGR 3466E Environmental Impact of Process Industries
ENGR 3477E Adsorption and Membrane Processes in Pollution Control
ENGR 3516E Vibrations and Dynamic Systems
ENGR 3526E Fluid Mechanics II
ENGR 3536E Materials and Manufacturing
ENGR 3546E System Modeling and Simulation
ENGR 3556E Electromechanical Actuators and Power Electronics
ENGR 4157E Power Machines
ENGR 4187E Solid Waste Processing and Recycling in the Minerals Industry
ENGR 4416E Fluid-Particle Systems
ENGR 4426E Air Pollution Control
GEOG 2037E Air Photo Interpretation
GEOL 2126E Mineralogy I
GEOL 4956E Geophysics
MATH 2037F Calcul avancé ou MATH 2037E Advanced Calculus
PHYS 2006E Introduction to Electricity and Electronics
PHYS 3046E Mechanical Properties of Solids and Fluids
Liste B
BIOL 1000E Canadian Environmental Biology
BIOL 1506F Biologie I ou BIOL 1506E Biology I
BIOL 2356F Principes d’écologie ou BIOL 2356E Principles of Ecology
BIOL 3056E Mineral Exploitation and the Biosphere
CHMI 1007F Chimie générale II ou CHMI 1007E General Chemistry II
COSC 1046E Computer Science I
GEOL 1007E Introductory Geology II
PHYS 1905F Astronomie générale ou PHYS 1905E General Astronomy
Complementary Studies Electives
ACCT 1001F Utilisation des données financières ou ACCT 1001E Using Financial Information
ANCS 1006E Greek Civilization
ANCS 1007E Roman Civilization
ANCS 2016E Classical Mythology
ANTR 1007E Introduction to Sociocultural Anthropology
ARCL 1006E Introduction to Archeology and Physical Anthropology
ECON 1006F Introduction à la microéconomie ou ECON 1006E Introduction to Microeconomics
ECON 1007F Introduction à la macroéconomie ou ECON 1007E Introduction to Macroeconomics
ENGL 1705E Introduction to Writing and English Studies
ENGL 2005E Literatures in English
ENGL 2606E Backgrounds to Western Literature I
ENGL 2616E The Bible and Literature
ENGL 2626E Critical Approaches
ENGL 2676E Popular Literature and Culture I
ENVI 2506EL Cultural Representations of the Environment
ENVI 2507F Empreinte écologique et développement durable
ENVI 2516EL Ecological Footprints and Demographic Change GEOG 1026F Introduction à la géographie physique ou GEOG 1026E Introduction to Physical Geography
GEOG 1027F Introduction à la géographie humaine ou GEOG 1027E Introduction to Human Geography
HIST 1106F Introduction à l’histoire du XXe siècle ou HIST 1106E Introduction to the 20th Century
HIST 1107F Perspectives historiques sur les problèmes contemporains ou HIST 1107E Contemporary Issues in Historical Perspective
HIST 1206F civilisation occidentale: depuis la Renaissance jusqu’à la Révolution française ou HIST 1206E Western Civilization: Renaissance to the French Revolution
HIST 1207F La civilisation occidentale: de la Révolution française à nos jours ou HIST 1207E Western Civilization: French Revolution to the Present
HIST 1406F Histoire canadienne: L’époque de la préconfédération ou HIST 1406E Canadian History: Pre-Confederation
HIST 1407F Histoire canadienne : depuis la confederation ou HIST 1407E Canadian History: Post-Confederation
JURI 1106F Introduction à l’étude du droit ou JURI 1006E Introduction to Legal Studies I
JURI 1107F Introduction au droit criminal ou JURI 1007E Introduction to Legal Studies II
JURI 1105E Introduction to Legal Studies
LBST 1006E Introduction to Labour Studies I
LBST 1007E Introduction to Labour Studies II
LBST 2026E The World of Work (cross-listed with SOCI-2026E)
LBST 2106E Occupational Health and Safety, Level I
LBST 2246E What Do Unions Do? (cross-listed with SOCI-2246E)
LBST 3106E Occupational Health and Safety, Level II
MGMT 1306F Gestion des organisations I ou MGMT 1006E Management of Organizations I
MGMT 1307F Gestion des organisations II ou MGMT 1007E Management of Organizations II
OPER 2006F Introduction à la science de la gestion ou OPER 2006E Introduction to Management Science
OPER 4016E Project Management (seulement éligible à titre de cours au choix pour les étudiants en génie mécanique)
PHIL 1105F Introduction à la philosophie ou PHIL 1115E Introduction to Philosophy
PHIL 2586F Philosophie de la sexualité ou PHIL 2126E Philosophy of Sexuality
PHIL 2156E Philosophy, Culture and Power
PHIL 2217F Éthique de l’environnement ou PHIL 2217E Environmental Ethics
PHIL 2256F Philosophie de l’éducation ou PHIL 2256E Philosophy of Education
PHIL 2505F Pensée critique et argumentation ou PHIL 2505E Critical Thinking and Argument
PHIL 2525F Problèmes éthiques contemporains ou PHIL 2525E Contemporary Moral Issues
PHIL 2216F Technologie, valeurs et environnement ou PHIL 2747E Technology, Freedom and Values
PHIL 2876E Business Ethics
POLI 1005E Introduction to Political Science
POLI 1006F Politique et sociétés ou POLI 1006E Political Regimes
POLI 1007F Problèmes politiques contemporains ou POLI 1007E Political Ideas and Political Actors
POLI 2306F Relations internationales ou POLI 2306E International Relations
POLI 2426E Individual, Community and the Political Order
POLI 2526E Approaches to Justice
POLI 2575E Philosophy of Law
PSYC 1105F Initiation à la psychologie ou PSYC 1105E Introduction to Psychology
SOCI 1015F Étude de la société ou SOCI 1015E Understanding Society
WOMN 1005F Introduction aux études des femmes ou WOMN 1005E Introduction to Women’s Studies
D’autres cours pertinents peuvent être choisis moyennant l’approbation du Directeur de l’École.
Règlements de programme
Pour conserver un rendement universitaire satisfaisant dans un programme de B.Eng., il faut :
1. avoir rempli toutes les conditions d’admission;
2. n’avoir pas eu plus d’un échec (6 crédits) parmi les 30 crédits précédents;
3. avoir obtenu une moyenne cumulative de 3,5 pour l’année précédente (ou les 30 crédits consécutifs précédents).
Est sujette à une période de probation d’un an la personne qui :
1. a des échecs pour plus de 6 crédits durant une année universitaire (ou une série de 30 crédits);
2. ne conserve pas une moyenne cumulative de 3,5 durant une année universitaire (ou une série de 30 crédits).
Est passible de renvoi de l’Université la personne qui :
1. ne remplit pas toutes les conditions d’admission en une année (ou après 30 crédits consécutifs);
2. a des échecs pour plus de 36 crédits;
3. n’a pas obtenu les notes minimales requises pour deux années consécutives ou 60 crédits consécutifs;
4.ne réussit pas à obtenir la note minimale dans le cours (ou une note satisfaisante dans un laboratoire) après la troisième tentative.